Cloud Backup for an Organization: What It Protects, and What It Does Not Replace
16 November 2026SPF, DKIM and DMARC: Stopping Others from Sending Email in Your Name
16 November 2026In many offices, everything sits on the same network: workstations, servers, printers, cameras, visitors’ Wi-Fi. One
compromised device can then see all the others. The Canadian Centre for Cyber Security explains that "network
segmentation reduces the attack surface, as it prevents widespread compromise of your organization’s network. If a
host on one network is compromised, the hosts on the other network segments will not be impacted by the compromise"
(ITSM.10.092).
Its ransomware guidance puts it another way: "Divide your network into several smaller components. This makes it more
difficult for ransomware to spread across the entire network"
(ITSAP.00.099).
What to keep apart
No source gives a single list for an office; this one is built from what the Canadian Centre asks:
- guests and connected devices: the Canadian Centre suggests connecting Internet of Things devices to a guest
network, whose "traffic must be separated from normal corporate traffic", and segmenting the network for those that
must stay on the corporate network, "such as printers, point-of-sale terminals"
(ITSAP.80.009); - workstations and servers: the zone "where most end user systems, application servers, and file and print
servers are installed", in its network security zone requirements
(ITSP.80.022); - device administration: the Canadian Centre recommends an "out-of-band management network or administrative
workstation that is physically separated from the operational data flow network", and that "network management
interfaces (NMIs) should not be directly exposed to the Internet"
(ITSM.80.101).
Our article on guest Wi-Fi covers the first of these zones
in detail.
A VLAN alone is not a barrier
This is the most common mistake. The Canadian Centre is clear: "VLANs are used for IP management and while they can be
useful in limiting broadcast traffic and allow for asset management on the network, they are not a security solution
for network segregation." "Firewalls, or devices with firewall capabilities, are essential to network segmentation",
and "VLANs are often used in combination with access control lists (ACLs) to enhance the filtering of traffic on your
network"
(ITSM.10.092).
In other words, VLANs without rules between them split the network on paper; the firewall between the zones decides
what gets through. Our guide Firewalls: what to know before you install one
explains that role.
Deny everything, then open what is needed
Between zones, the Canadian Centre asks for an access control policy "constructed to deny all traffic that is not
explicitly permitted"
(ITSP.80.022).
NIST calls it deny by default: firewalls should block all traffic "that has not been expressly permitted by the
firewall policy", the traffic the organization does not need
(SP 800-41).
In practice, you start from an inventory: which workstations print to which printers, which workstations talk to which
servers, where devices are administered from. Each need becomes a rule; the rest is denied.
How to do it without stopping everything
The sources set no method for an organization. A possible order, to adapt:
- the inventory of devices and of the real traffic between them;
- the guest network and connected devices apart, the simplest zone to separate;
- device administration on its own network;
- servers separated from workstations, with rules written from the inventory, starting by logging denied traffic
before blocking it; - a rule review at every change, so that a temporary exception does not become permanent.
On the day of an incident, that work makes the difference: our article on
the first hour of a ransomware attack shows why isolating
quickly matters so much.
Frequently asked questions
Is a VLAN enough to separate two networks?
No. According to the Canadian Centre, VLANs are not a security solution for network segregation; firewalls, or devices
with firewall capabilities, are essential to network segmentation.
Which zones should an office separate first?
The guest and connected-device network, then device administration, then servers separated from workstations. The
Canadian Centre asks that guest network traffic be separated from normal corporate traffic.
What rule should apply between zones?
Deny all traffic that is not explicitly permitted, as the Canadian Centre asks, then open only what the organization
needs.
What now?
Our Business networking page presents the design and segmentation work we
do, and the monthly block of hours reserves the time to carry it out in
steps. To start, the free network analysis looks at your switches,
your Wi-Fi and who can connect to what. It is offered to organizations with 40 or more employees.
P.S. Sixteen questions, eight domains, a clear picture of your strengths and blind spots: start the assessment.
